|
首先配置pppoe拨号上网 步骤如下 在终端中输入： #pppoe-setup Welcome to the Roaring Penguin ADSL client setup. First， I will run some checks on your system to make sure the PPPoE client is installed properly… Looks good！ Now， please enter some information： USER NAME >;>;>; Enter your PPPoE user name (default XXX): 在这里输入ADSL用户名 INTERFACE >;>;>; Enter the Ethernet interface connected to the ADSL modem For Solaris， this is likely to be something like /dev/hme0. For Linux， it will be ethn， where ‘n’ is a number. （default eth0）：如果一个网卡就在这里输入eth0 Do you want the link to come up on demand， or stay up continuously？ If you want it to come up on demand， enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently， enter ‘no’ （two letters， lower-case.） NOTE： Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. >；>；>； Enter the demand value （default no）：直接回车 DNS Please enter the IP address of your ISP‘s primary DNS server. If your ISP claims that ’the server will provide DNS addresses‘， enter ’server‘ （all lower-case） here. If you just press enter， I will assume you know what you are doing and not modify your DNS setup. >;>;>; Enter the DNS information here:在这里输入server 即自动获得DNS PASSWORD >;>;>; Please enter your PPPoE password:输入ADSL密码 FIREWALLING Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup； however， these will provide basic security. If you are running any servers on your machine， you must choose ‘NONE’ and set up firewalling yourself. Otherwise， the firewall rules will deny access to all standard servers like Web， e-mail， ftp， etc. If you are using SSH， the rules will block outgoing SSH connections which allocate a privileged source port. The firewall choices are： 0 - NONE： This script. will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules. 1 - STANDALONE： Appropriate for a basic stand-alone web-surfing workstation 2 - MASQUERADE： Appropriate for a machine acting as an Internet gateway for a LAN >;>;>; Choose a type of firewall (0-2):这里输入0，表示没有防火墙 ** Summary of what you entered ** Ethernet Interface： eth0 User name： XXX Activate-on-demand： No DNS： Do not adjust Firewalling： MASQUERADE >;>;>; Accept these settings and adjust configuration files (y/n)?这里输入y即可，输入n就是重头设置过。 配置完成！ 配置完成之后 当然不要忘记激活我们的网卡eth0 啦！ |
|
|
