分享

H3C 无线AP 出现Tryiag to get the IP address from the DHCP server... wa1208h20_fat.bin文件上传的经验

 昵称11380812 2012-12-29
因为要把瘦的改成胖的系统,在升级的过程中出现了这个问题,Tryiag to get the IP address from the DHCP server...............
和H3C的工程师联系,给我发了fat的文件WA1208EH-CMW520-R11115P15-FAT
建立了文件夹是 WA1208EH-CMW520-R11115P15-FAT  这个名字。
 
把里面的文件改成   wa1208h20_fat.bin   是这个名字。
在360安全卫士里面下载了tftpd32.
tftpd32  就是把Browse里面换成下载的文件夹是 WA1208EH-CMW520-R11115P15-FAT  就好了,其他的把电脑的IP改成 192.168.1.5 
 
在无线AP启动的时候在打开tftpd32
 
打开超级终端:填写com 确定
在 连接时使用里面找到com1或者com3都可以确定
点还原为默认值  确定
在传送里面点捕获文字,这样好看一看你上传对不对。
点发送文件,在浏览里面找到 wa1208h20_fat.bin   一定是这个文件不要是文件夹。
在协议里面点Xmodem
这样超级终端就设置好了。其他的就不要设置什么了,我以前按照网上的资料设置的不好用也没有详细的介绍,有的介绍点超级终端的文件,属性  设置 ASCII码设置,我点了,在设置后出现了打一个字出现了两个的现象,就没有设置这个。
 
这时启动无线AP,等AP启动后,点tftp。
无线AP启动的时候按Ctel+B ,点Enter就进入了系统设置了。
 
先格式化一下 Ctrl+F  这样把AP的空间弄大一点,省的空间不够。
下面是我捕捉到的文字:
                                                                        *
*                   H3C WA1208E BootWare, Version 2.12                     *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2010 Hangzhou H3C Technologies Co., Ltd.
 
Compiled Date       : Dec 31 2010
CPU Type            : PPC 405EP
CPU L1 Cache        : 32KB
CPU Clock Speed     : 266MHz
Memory Type         : SDRAM
Memory Size         : 64MB
Memory Speed        : 133MHz
BootWare Size       : 512KB
Flash Size          : 8MB
PCB Version         : Ver.A
 
 
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Please input BootWare password:
 
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
 
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Modify BootWare Password                                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Enter your choice(0-9):
Warning:All things will lost!Are you sure to format? [Y/N]Y.................
......................................
Format success.
 
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Modify BootWare Password                                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Enter your choice(0-9):
 
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Modify BootWare Password                                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Enter your choice(0-9): 3
 
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash                                        |
|<1> Download Application Program To SDRAM And Run                         |
|<2> Update Main Application File                                          |
|<3> Modify Ethernet Parameter                                             |
|<0> Exit To Main Menu                                                     |
|<Ensure The Parameter Be Modified Before Downloading!>                    |
============================================================================
Enter your choice(0-3):
 
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash                                        |
|<1> Download Application Program To SDRAM And Run                         |
|<2> Update Main Application File                                          |
|<3> Modify Ethernet Parameter                                             |
|<0> Exit To Main Menu                                                     |
|<Ensure The Parameter Be Modified Before Downloading!>                    |
============================================================================
Enter your choice(0-3): 3
 
==========================<ETHERNET PARAMETER SET>==========================
|Note:       '.' = Clear field.                                            |
|            '-' = Go to previous field.                                   |
|          Ctrl+D = Quit.                                                  |
============================================================================
Protocol (FTP or TFTP) :TFTP TFTP
Load File Name         :wa1208h20_fat. wa1208h20_fat.bin
Target File Name       :wa1208h20_fat.bin wa1208h20_fat.bin
Server IP Address      :192.168.1.5 192.168.1.5
Local IP Address       :192.168.1.55 192.168.1.55. 
Gateway IP Address     :0.0.0.0 0.0.0.0
 
 
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash                                        |
|<1> Download Application Program To SDRAM And Run                         |
|<2> Update Main Application File                                          |
|<3> Modify Ethernet Parameter                                             |
|<0> Exit To Main Menu                                                     |
|<Ensure The Parameter Be Modified Before Downloading!>                    |
============================================================================
Enter your choice(0-3): 2
Loading.....................................................................
......................................................................Done!
6981299 bytes downloaded!
Updating File flash:/wa1208h20_fat.bin......................................
................Done!
 
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash                                        |
|<1> Download Application Program To SDRAM And Run                         |
|<2> Update Main Application File                                          |
|<3> Modify Ethernet Parameter                                             |
|<0> Exit To Main Menu                                                     |
|<Ensure The Parameter Be Modified Before Downloading!>                    |
============================================================================
Enter your choice(0-3): 0
 
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Modify BootWare Password                                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
============================================================================
Enter your choice(0-9): 1
Starting to get the main application file--flash:/wa1208h20_fat.bin!........
.............................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
.........................................................Done!
Extend BootWare Version is not equal,updating? [Y/N]
Updating Extend BootWare.......Done!
BootWare updated,System is rebooting now.
System is starting...
Booting Normal Extend BootWare...
The Extend BootWare is self-decompressing.................Done!
 
****************************************************************************
*                                                                          *
*                   H3C WA1208E BootWare, Version 2.13                     *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2011 Hangzhou H3C Technologies Co., Ltd.
 
Compiled Date       : Mar  9 2011
CPU Type            : PPC 405EP
CPU L1 Cache        : 32KB
CPU Clock Speed     : 266MHz
Memory Type         : SDRAM
Memory Size         : 64MB
Memory Speed        : 133MHz
BootWare Size       : 512KB
Flash Size          : 8MB
PCB Version         : Ver.A
 
 
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/wa1208h20_fat.bin!........
.............................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
.........................................................Done!
System application is starting...
Configuration file is skipped.
User interface con0 is available.
 
Press ENTER to get started.
<WA1208E-GP-H20>
<WA1208E-GP-H20>
<WA1208E-GP-H20>
#Jan 11 19:28:50:825 2009 WA1208E-GP-H20 SHELL/4/LOGIN:
 Trap 1.3.6.1.4.1.2011.10.2.2.1.1.3.0.1<h3cLogIn>: login from Console
%Jan 11 19:28:50:825 2009 WA1208E-GP-H20 SHELL/4/LOGIN: Console login from con0
%Jan 11 19:28:52:295 2009 WA1208E-GP-H20 DRVMSG/1/DRVMSG:    WLAN-Radio1/0/1: change status to up
%Jan 11 19:28:52:295 2009 WA1208E-GP-H20 IFNET/4/LINK UPDOWN:
 WLAN-Radio1/0/1: link status is UP
%Jan 11 19:28:55:316 2009 WA1208E-GP-H20 IFNET/4/LINK UPDOWN:
 Ethernet1/0/1: link status is UP
<WA1208E-GP-H20>
到这里就好了,重新启动,就OK!在升级或者传文件的过程中有很多问题会发生的,我就是把我上传的经验告诉有玩wa1208e20的人。虽然机子是很久以前的,但很好用。
在这里感谢H3C的工程师,因为自己没有经验,弄了有两个月的时间,弄弄停停。是H3C的工程师经常打电话来,问如何情况,才让我一直走下去。
   2012.12.29
 
 
 
 
 
 
 
 

    本站是提供个人知识管理的网络存储空间,所有内容均由用户发布,不代表本站观点。请注意甄别内容中的联系方式、诱导购买等信息,谨防诈骗。如发现有害或侵权内容,请点击一键举报。
    转藏 分享 献花(0

    0条评论

    发表

    请遵守用户 评论公约

    类似文章 更多