仿苹果机 典籍10寸笔记本电脑用U盘装系统过程

仿苹果机用U盘装系统程序                                      1.开机按DEL键，出现系统设置界面。                                                              2.用箭头右键             调到BOOT项                                                                              3.用箭头下键选—》Hard disk drives选项。                                                           4.选USB作第一启动项，按Enter键，确认，再往上调一格，确认。 按F10保存，重启。                 5.开机就进入U盘装机系统须3—8分钟。                                                           6.装好后开机设置硬盘启动Hard disk drives.                                                          7.进选项点SATA;pm—hitachi  hts545050B9A300.                                                     8.重启开机进入正常模式。                                                                        典籍 10寸笔记本电脑U盘启动程序                                                            1.开机点DEL键，进入系统设置，选BOOT。                                                    2.进3ra BOOT devie {USB Gener ic storage. 译USB通用IC。                                       3.确认，再进BOOT进硬盘启动SATA  PH—TOSHIBAMK16556SK,  确认按F10保。                 4.重启电脑，进入系统XP系统。选 1 项PE安装                                                5.从硬盘启动，重启。                                                                        6.自动安装 1，2，3，4项完成系统安装。                                                       7.重启，注系统软件必须安装，必然系统不好用。                                                8，再按装驱动精灵，检测系统软件。                                                           9.安装升级软件，再补丁，杀毒。 完成，。