Bathroom Article Toilet Chapter--Water Saving Style

=======================
【Concept】 
  
    As the name suggests, water saving toilet
=======================
【Features Terminology】 
  
    Potty mouth bottom defecating directly connected to the sewage outfall water, sewage defecating in the bottom potty mouth and sat install a toilet flapper seal superstructure connection, set up in front of a toilet plunger pressure water heater, Piston pressure water heater inlet connection with deposit tanks, equipped with water stop valve, piston outlet pressure water's edge to sit on the toilet and outlet spout connection with water stop valve on the outlet pipe, On defecating near water and sewage outfall sewer outfall port connection, then a connection with other sewage pipes, the water-saving toilet, high water-saving efficiency, while reducing the amount of sewage discharge, which can effectively reduce drainage and sewage treatment required human, material and financial resources.
    Toilet water movement through the use of export mode, there are swirls, shunt-shaped, etc. to improve water conservation principles.
=======================
【Structure Terminology】 
  
   Toilet, sealed baffle washer
=======================
【Features Terminology】 
  
    Potty mouth bottom defecating directly connected with the water sewage outfall, defecating in the bottom potty mouth water, a seal activity tailgate, tailgate activities consists of a connecting rod seal is fixed at the bottom of the toilet sit, the connecting rod Sitting through a rotating rod and toilet superstructure connection, in front of the toilet set up a water heater pressure piston, the piston's inlet pressurized water tank connected with the deposit, which consists of sealing valve, piston pressure water heater outlet spout outlet and connected by sitting on the edge of the toilet, and has a water stop valve on the outlet pipe in the water near the sewage outfall and sewer outfall defecating port junction, then a connection with other wastewater pipes.
     Chong 1.4 liters / second, stool 4 liters / second low water consumption, rewriting traditional toilet once from 16 liters of water, 12 liters, 9 liters 3-6 liters of history, lead to water-saving technologies and new revolution
=======================
【Standard terminology】
------------------
1 [flushing effect]
 
    In total no more than six liters of water washing conditions should meet the following requirements:
    Solids discharge polypropylene ball method, rinse three times the average number of balls by not less than 85;
    After each washing, using ink-line method, the cumulative total residual ink marks grow at 50 mm;
    Seal and seal Reply depth of not less than 50 mm; dilution rate of effluent discharge test after no less than 100 times.
------------------
2 [pipeline capacity]
 
    All four specimens out of the toilet, and by 5 meters horizontal riser pipe into the sewage, but also to be able to out 12 meters.
------------------
3 [tank accessories]
 
    Control mechanism should be stable, easy to operate, flexible movement without resistance;
    Inlet valve strength and sealing performance should meet the requirements of first-class products, "low toilet tank fittings building materials industry standards" provisions;
    At 0.05 MPa water pressure, water time is less than 120 seconds;
    Drains must be higher than the effective working surface 20 mm;
    Inlet valve outlet should be above the overflow pipe 20 mm; drain valve should not have leakage;
    Effective when the tank 6 liters of water, drainage flow drain valve shall not be less than 2.0 liters per second;
    Life of more than 50,000 times.
=======================

 

【Article is excerpted from: Web Search】
【Reserved Integrate / Just Reference】
【Translation is by The Network】