Note by Blyss Sarania: Scarlet.Crush hasn't logged on to the forum in 5 months, and there hasn't been an update to this project in a while. The wrapper works well enough as is, but there has been an unofficial continuation of the project here. Note that Scarlet.Crush is not involved in that, it's just a continuation of the project based on his source. You can either use Scarlet.Crush's version which is found here in this post, or you can use the updated version in the thread previously linked. Choose whatever suits your needs best. End note. Updated : New version released 1.2.0.160. See post #2505. Updated : Update Available 1.2.1.165 - WinXP compatibility for ScpUser.exe/XInput1_3.dll, Service Channel Bypass feature added, Proof of Concept KBM mapping sample added. See Post #2574. Updated : Update Available 1.2.2.175 - Includes all previous Updates. Added Fixup for 00:26:5C signature, Renamed ScpPad2Key -> GtaMapper, added DskMapper & D3Mapper samples. Refactored & moved common functionality into ScpControl.dll. See Post #2702. Download latest version here. [1.2.0.160] Download latest update here. [1.2.2.175] Download latest source here. [1.2.2.175] Requirements 1. Microsoft .NET 4.0 2. Visual C 2013 Runtime. 3. Latest DirectX Runtime. 4. Latest Xbox 360 Controller Drivers available. 5. Genuine Sony DualShock3 or DualShock4 or SixAxis Controller(s). 6. Minimum of Bluetooth 2.0 + EDR Dongle (if using Bluetooth). 7. Administrator rights on your PC. Note : The Bluetooth Driver requires that you dedicate a Bluetooth Dongle to DS3/DS4 use. It will not be usable by other Bluetooth devices after the driver has been installed. Important - make sure your Bluetooth dongle and DS3(s) are plugged in via USB before installing the drivers. Xbox 360 Controller Drivers - these are available from Microsoft here. Windows 7 - Run before installing the SCP Drivers. (Windows 7 shipped with outdated drivers which may cause stability issues) Windows XP and Vista - Run after after installing the SCP Drivers. Windows 8/8.1 not required. New Install 1. Connect your Dongle and DS3 via USB and let Windows install it's default drivers. 2. Copy the archive to a temporary directory [eg C:\Temp]. 3. Right click on the archive and select Properties. 4. Click the Unblock button if it is displayed on the General tab. 5. Unpack the archive. 6. Create a directory where you want the Service to run from. [Recommended - C:\Program Files\Scarlet.Crush Productions *] 7. Copy the contents of the ScpServer\bin to the directory you created. 8. Run ScpDriver.exe. 9. XP/Vista - check the Force Install option. Win 7/8 leave it unchecked. 10. Click Install. [see screenshot below] 11. If you do not see the install summary as per screenshot and your dongle is in the directly supported list - click Uninstall, check the Force Install option, click Install. 12. Click Exit. * create from an elevated command prompt if you have UAC enabled. The directory should not be created anywhere off your User directory (eg on your Desktop, or in your Downloads directory), it should also not be on a Network drive. Upgrade from 1.1.0.139 1. Copy the archive to a temporary directory [eg C:\Temp]. 2. Right click on the archive and select Properties. 3. Click the Unblock button if it is displayed on the General tab. 4. Unpack the archive. 5. Stop the Service [net stop "SCP DS3 Service" - from an elevated command prompt, or use Service Control Manager] 6. Close ScpMonitor if it is running. [Right-click on the icon in the Task bar and select Exit] 7. Copy the contents of the ScpServer\bin folder to your existing install folder. ** 8. Start the Service [net Start "SCP DS3 Service" - from an elevated command prompt, or use Service Control Manager] ** The DS3, BTH and Bus drivers have not changed, so you do not need to re-run ScpDriver.exe. Apply Update 1. Copy the archive to a temporary directory [eg C:\Temp]. 2. Right click on the archive and select Properties. 3. Click the Unblock button if it is displayed on the General tab. 4. Unpack the archive. 5. Stop the Service [net stop "SCP DS3 Service" - from an elevated command prompt, or use Service Control Manager] 6. Close ScpMonitor if it is running. [Right-click on the icon in the Task bar and select Exit] 7. Copy the contents of the ScpServer\bin folder to your existing install folder. 8. Start the Service [net Start "SCP DS3 Service" - from an elevated command prompt, or use Service Control Manager] Driver installation for DualShock 4 - See Post #1852. Pairing a DS4 to your Bluetooth Dongle - plug in the DS4 to USB while the Service is running, the DS4 will be automatically paired if required. Pairing a DS3 to your Bluetooth Dongle - plug in the DS3 to USB while the Service is running, the DS3 will be automatically paired if required. Disconnecting a DS3 - Press and hold L1 + R1 + PS for 2 seconds. The drivers support 4 DS3s connected by USB or via Bluetooth (one dongle can support 4 DS3 connections). Supported OS - XP (x86), Vista (x86, amd64), Win 7 (x86, amd64), Win 8 (x86, amd64), Win 8.1 (x86, amd64) See Post #1851 if your dongle is not on the list below. Directly Supported Dongles USB\VID_03F0&PID_231D USB\VID_045E&PID_3500 USB\VID_0461&PID_4D75 USB\VID_046D&PID_C709 USB\VID_047D&PID_105E USB\VID_0489&PID_E011 USB\VID_0489&PID_E042 USB\VID_0489&PID_E04E USB\VID_04CA&PID_3006 USB\VID_050D&PID_016A USB\VID_05AC&PID_821A USB\VID_05AC&PID_821F USB\VID_07D1&PID_F101 USB\VID_0930&PID_0215 USB\VID_0A12&PID_0001 USB\VID_0A5C&PID_200A USB\VID_0A5C&PID_2101 USB\VID_0A5C&PID_2146 USB\VID_0A5C&PID_2148 USB\VID_0A5C&PID_2150 USB\VID_0A5C&PID_2153 USB\VID_0A5C&PID_217D USB\VID_0A5C&PID_2198 USB\VID_0A5C&PID_21E1 USB\VID_0A5C&PID_21E8 USB\VID_0B05&PID_1715 USB\VID_0B05&PID_1783 USB\VID_0B05&PID_1785 USB\VID_0B05&PID_179C USB\VID_0B05&PID_17B5 USB\VID_0B05&PID_B700 USB\VID_0C10&PID_0000 USB\VID_0CF3&PID_3002 USB\VID_0CF3&PID_3004 USB\VID_0CF3&PID_3005 USB\VID_0DB0&PID_3801 USB\VID_0DF6&PID_2200 USB\VID_0E5E&PID_6622 USB\VID_1131&PID_1001 USB\VID_1131&PID_1004 USB\VID_1286&PID_2044&MI_00 USB\VID_13D3&PID_3304 USB\VID_413C&PID_8126 USB\VID_8086&PID_0189 USB\VID_8087&PID_07DA USB\VID_0930&PID_0214 USB\VID_0A5C&PID_2154 USB\VID_0489&PID_E04D USB\VID_413C&PID_8197 USB\VID_0A5C&PID_2021 USB\VID_05AC&PID_8286 USB\VID_0A5C&PID_2100 USB\VID_0BDA&PID_8723 USB\VID_044E&PID_3010 USB\VID_0B05&PID_1788 USB\VID_0A5C&PID_2190 USB\VID_13D3&PID_3315 USB\VID_0489&PID_E027 USB\VID_05AC&PID_821D USB\VID_0BDA&PID_0724 USB\VID_050D&PID_065A USB\VID_0A5C&PID_21E3 USB\VID_05AC&PID_8216 USB\VID_0A5C&PID_21B4 Tools ScpServer.exe : GUI based version of the Service. ScpPair.exe : GUI tool to allow pairing a DS3 with an external device (eg Nexus Tablet). Zadig.exe : GUI tool (libwdi) which allows installing WinUSB on DS4s and Bluetooth dongles which do not appear on the supported list. ___________________________________________________________________ The Filter Driver + Wrapper is no longer supported. An updated XInput Wrapper is included as part of the Driver Package and maintains backward compatibility with : - DS3 on SCP Filter Driver - DS3 on libusb-win32 Filter Driver - DS2 on Play.com USB Adapter - SpeedLink Strike FX pad. ___________________________________________________________________ |
|