分享

Rsync服务器搭建遇到的报错解决办法

 醉人说梦 2023-11-21 发布于广东

遇到错误1

[root@backup tmp]# rsync -avz /etc/hosts -e 'ssh -p 22' root@172.16.1.5:/tmp/

rsync: Failed to exec ssh: No such file or directory (2)

rsync error: error in IPC code (code 14) at pipe.c(84) [sender=3.0.6]

rsync: connection unexpectedly closed (0 bytes received so far) [sender]

rsync error: error in rsync protocol data stream (code 12) at io.c(600) [sender=3.0.6]

从网上找打解决方法讲是没有安装openssh客户端,然后安装尝试一下

[root@backup tmp]# yum -y install openssh-clients.x86_64

安装完成之后有执行一次,发现错误提示变了,说明刚才那个错误已解决然后开始解决新的报错问题

从本地服务器上推送文件到172.16.1.5这台服务器上,发现一直提示这个错误信息。然后在网上找各种解决方法,最终得以解决。

[root@backup tmp]# rsync -avz /tmp/hosts -e 'ssh -p 22' root@172.16.1.5:/tmp/

root@172.16.1.5's password:

bash: rsync: command not found

rsync: connection unexpectedly closed (0 bytes received so far) [sender]

rsync error: error in rsync protocol data stream (code 12) at io.c(600) [sender=3.0.6]

造成这种原因是因为172.16.1.5这台服务上没有安装rsync这个软件包,安装后得以解决

[root@backup tmp]# rsync -avz /tmp/hosts -e 'ssh -p 22' root@172.16.1.5:/tmp/

root@172.16.1.5's password:

sending incremental file list

hosts

sent 124 bytes  received 31 bytes  62.00 bytes/sec

total size is 158  speedup is 1.02

[root@lb01 tmp]# ifconfig eth1| awk -F "[ :]+" 'NR==2 {print $4}'

172.16.1.5

[root@lb01 tmp]# ls /tmp/

hosts

 

对端没有配置文件里面的目录不存在

[root@nfs01 sh]# rsync -avz /backup/ rsync_backup@172.16.1.41::backup/ --password-file\=/etc/rsync.password

@ERROR: chdir failed

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

对端配置文件里面的目录存在,但是权限被拒绝

[root@nfs01 sh]# rsync -avz /backup/ rsync_backup@172.16.1.41::backup/ --password-file\=/etc/rsync.password

sending incremental file list

./

rsync: failed to set times on "." (in backup): Operation not permitted (1)

1/

rsync: recv_generator: mkdir "1" (in backup) failed: Permission denied (13)

*** Skipping any contents from this failed directory ***

sent 46 bytes  received 15 bytes  122.00 bytes/sec

total size is 0  speedup is 0.00

rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1039) [sender=3.0.6]

 

模块名称错误

[root@nfs01 sh]# rsync -avz /backup/ rsync_backup@172.16.1.41::baskup/ --password-file\=/etc/rsync.password

@ERROR: Unknown module 'baskup'

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

 

服务端虚拟用户不存在

[root@nfs01 sh]# rsync -az /backup/ rsync_backup@172.16.1.41::backup/ --password-file\=/etc/rsync.password

@ERROR: invalid uid rsync

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

 

服务端没有backup模块里面的密码文件,客户端和服务端的密码文件密码不一致

[root@nfs01 sh]# rsync -az /backup/ rsync_backup@172.16.1.41::backup/ --password-file\=/etc/rsync.password

@ERROR: auth failed on module backup

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

 

在传输的时候远程模块名称前面多写了一个“/

[root@nfs01 /]# rsync -avz /tmp/  rsync_backup@172.16.1.41::/backup/ --password-file\=/etc/rsync.password              

ERROR: The remote path must start with a module name not a / #远程路径必须是模块名称

rsync error: error starting client-server protocol (code 5) at main.c(1503) [sender=3.0.6]

    本站是提供个人知识管理的网络存储空间,所有内容均由用户发布,不代表本站观点。请注意甄别内容中的联系方式、诱导购买等信息,谨防诈骗。如发现有害或侵权内容,请点击一键举报。
    转藏 分享 献花(0

    0条评论

    发表

    请遵守用户 评论公约

    类似文章 更多