緊急啟動緊急發電機的操作程序
How to start the EM’CY GENERATOR in emergency condition
緊急發電機在緊急狀態下（也就是說沒電的情況下），可以用液壓油啟動，如圖1\2所示，首先要旋緊紅色按鈕，是電池閥強制頂開，然後確保液壓油柜在正常範圍。IF you want to start engine in emergency condition, first, tighten the pin clockwise, then solenoid V/V would open as shown in figure 1, after check the level of hydraulic oil tank.
1 2
手動加壓到油表的normal範圍，如圖3所示 As shown in figure3，boosted the pressure to normal range what could start engine。
3
3. 旋開如圖4\5所示的閥，手動旋開黑色閥鈕，扳向油柜的方向，使之壓入液壓按鈕，直到電機啟動為止。 Turned the V/V out anticlockwise as shown in figure 3, and made the handle to press the pin, now you can see the pressure is breakdown, then engine would run.
3
5 5
5
4.電機停止后，一切要恢復原來的狀態。When engine stop, everything you do must be back out.
|
|
